当前位置>主页 > 期刊在线 > 物联网 >

物联网2021年1期

新型智能联合终端边缘智能设备检测方法
莫宇,孙福强
(上海金智晟东电力科技有限公司,上海 200233)

摘  要:随着近期新型智能联合终端系统的研发,原有通过IEC104/IEC101 规约实现配电终端检测的方法已无法满足检测要求。针对配电终端检测方法与新型智能联合终端系统通信协议不一致的问题,通过HTTP、Kafka、MQTT 建立测试平台与物联管理平台、物管平台与智能联合终端的通信,提出了基于HTTP、Kafka、MQTT 的边缘智能设备近端和远端检测方法。该方法实现了对新型智能联合终端边缘智能设备的检测,有效地提高了边缘智能设备出厂的合格率,保障了边缘智能设备的正常运行。


关键词:配电网;新型智能联合终端;边缘智能设备检测



中图分类号:TP391.44;TN929.5         文献标识码:A         文章编号:2096-4706(2021)01-0159-06


Detection Method on Edge Smart Equipment of New Intelligent Joint Terminal

MO Yu,SUN Fuqiang

(Shanghai Sunest Electricity Technology Co.,Ltd.,Shanghai 200233,China)

Abstract:With the recent research and development of new intelligent joint terminal system,the original detection method of distribution terminal based on IEC104/IEC101 protocol is impossible to meet the detection requirements. Aiming at the problem that the detection method of distribution terminal is inconsistent with the communication protocol of the new intelligent joint terminal system,the communication between the test platform and the IoT management platform,IoT management platform and the intelligent joint terminal are established through HTTP,Kafka and MQTT,and the near end and far end detection method of edge intelligent equipment based on HTTP,Kafka and MQTT is proposed. This method realizes the detection of the edge intelligent equipments of the new intelligent joint terminal,effectively improves the qualified rate of the edge intelligent equipments,and ensures the normal operation of the edge intelligent equipments.

Keywords:distribution network;new intelligent joint terminal;edge intelligent equipment detection


参考文献:

[1] 何松,李育灵.IEC-104 规约应用分析 [J]. 山西电力,2007(4):18-21.

[2] 吴晓宇. 基于IEC104 规约的配网监控服务器的设计与实现 [D]. 北京:华北电力大学,2018.

[3] 唐宏丹,王旭,杨福有,等. 应用IEC101/104 报文快速排查变电站通信故障 [J]. 电工文摘,2015(2):24-26.

[4] 王雷,史金伟.IEC 104 规约中程序化控制的扩展应用 [J].供用电,2012,29(4):52-53+76.

[5] 李兴源,魏巍,王渝红,等. 坚强智能电网发展技术的研究 [J]. 电力系统保护与控制,2009,37(17):1-7.

[6] 王秀茹,刘刚,凌万水,等. 智能分布式馈线自动化网络闭环仿真测试技术 [J]. 电子器件,2019,42(6):1416-1420+1427.

[7] 张磐,凌万水,刘东. 基于案例预置的馈线自动化测试方法与应用 [J]. 广东电力,2015,28(8):84-88.

[8] 熊小敏,杨鑫,刘兆璘,等. 车路协同的云管边端架构及服务研究 [J]. 电子技术应用,2019,45(8):14-18+31.

[9] 江苏深瑞汇阳能源科技有限公司. 一种基于“云- 管-边- 端”架构的智能配电系统:CN202010380087.5[P].2020-08-18.

[10] 陈力. 企业移动智能终端检测技术深化研究与实现 [D].广州:华南理工大学,2015.

[11] 宋丽.一种基于MQTT协议的机房动力环境监控系统 [J].单片机与嵌入式系统应用,2020,20(8):83-86.

[12] 胡镒良,章杰,王星辉.MQTT 协议的自供电温湿度监测系统 [J]. 单片机与嵌入式系统应用,2020,20(7):69-71.

[13] 李纯洁,韩显业,申宁. 基于Modbus-TCP 和http 的轨道交通电力SCADA 系统故障录波传输设计 [J]. 船电技术,2020,40(8):56-60.

[14] 吴其祥,李祖猛,马华. 基于HTTP 协议的隐蔽信道研究 [J]. 信息安全与通信保密,2009(1):73-74.

[15] 刘英杰. 基于Kafka 和时序数据库的物联网数据测控系统设计与实现 [D]. 济南:山东大学,2020.

[16] 张娜,史佳炳,吴彪,等. 基于Netty 和Kafka 的IOT终端服务系统设计方案 [J]. 浙江理工大学学报(自然科学版),2020,43(2):240-245.


作者简介:莫宇(1983—),男,汉族,上海人,工程师,硕士,研究方向:计算机应用技术。