当前位置>主页 > 期刊在线 > 智能制造 >

智能制造2019年18期

基于虚拟仪器的AOD 炉喷溅预测特征信号采集与分析系统设计
郑伟南,杨程皓,张静,于景辉
(吉林建筑科技学院,吉林 长春 130114)

摘  要:本文采用熔炼过程中的吹气噪声信号、氧枪振动信号和火焰图像信息作为特征信号进行采集和分析,以表征喷溅的发生,并进行基于LabVIEW 的溅射特征信号采集与分析仿真系统的软硬件设计。系统中的信号调理模块与音频传感器和振动传感器配合,检测声音和振动信号并发出信号,数据采集卡通过PCI 接口与工业计算机连接。构建硬件平台,利用LabVIEW 虚拟仪器开发平台构成采集系统的上位机管理系统。


关键词:虚拟仿真;喷溅预测;多信号融合处理



中图分类号:TP23;TP274+.2         文献标识码:A         文章编号:2096-4706(2019)18-0161-02


Design of AOD Furnace Splash Prediction Characteristic Signal Acquisition and Analysis System Based on Virtual Instrument

ZHENG Weinan,YANG Chenghao,ZHANG Jing,YU Jinghui

(Jilin University of Architecture and Technology,Changchun 130114,China)

Abstract:In this paper,blowing noise signal,oxygen gun vibration signal and flame image information during melting process are used as characteristic signals to collect and analyze to characterize the occurrence of spatter. Hardware and software design of sputtering signal acquisition and analysis simulation system based on LabVIEW. The signal conditioning module in the system works with audio sensor and vibration sensor to detect sound and vibration signals and send signals. The data acquisition card is connected with industrial computer through PCI interface. The hardware platform is constructed,and the upper computer management system of the acquisition system is composed of the development platform of LabVIEW virtual instrument.

Keywords:virtual simulation;splash prediction;multi-signal fusion processing


基金项目:吉林省大学生创新创业计划训练项目:基于虚拟仪器的AOD 炉喷溅预测特征信号采集分析系统设计(项目编号:吉教高字[2017]54 号3394)。


参考文献:

[1] 王俊娜,雷静. 多传感器信息融合及其应用综述 [J]. 信息记录材料,2016,17(5):78-79.

[2] 王剑. 基于LabVIEW 的数据采集及分析系统的开发 [D].哈尔滨:哈尔滨理工大学,2004.

[3] 韩顺杰,曾景宇,孙延平,等. 冶炼过程喷溅特征信号采集系统设计 [J]. 电子技术与软件工程,2016(16):140-142.


作者简介:

郑伟南(1986-),女,朝鲜族,吉林长春人,硕士研究生,讲师,研究方向:智能控制;

杨程皓(1995-),男,汉族,河南洛阳人,学士学位,研究方向:智能控制。