摘 要：先进制造产品系统化、集成化、信息化程度高，涉及的技术参数多，需要产品标准的规范和引领来提升先进制造产品与技术的准确度、稳定性和互通性。制定先进制造产品与技术系列团体标准时，宜细分为“技术要求”“检验方法”和“制造工艺规范”三个标准文件来编写，并确保标准技术内容的可行性、科学性、适用性、先进性，提高标准质量。最后以一体化成型微电机壳体产品团体标准为例，分享在先进制造产品与技术系列团体标准制定方面的具体实践经验。
关键词：先进制造业；产品与技术；团体标准；制定与实践
DOI:10.19850/j.cnki.2096-4706.2022.02.045
中图分类号：G307 文献标识码：A 文章编号：2096-4706（2022）02-0177-03
Discussion on the Formulation and Practice of Advanced Manufacturing Industry Product and Technology Series Association Standard
LIU Shaoyu1, ZANG Chunhua 2, XIE Jiana 3, LIU Guixiong1,4
(1.Measurement Control Technology and Equipment Application Promotion Association of Guangdong Province, Guangzhou 510640, China; 2.Guangdong Zhuhai Supervision Testing Institute of Quality and Metrology, Zhuhai 519050, China; 3.Jieyang Huibaochang Electrical Appliance Co., Ltd., Jieyang 522000, China; 4.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China)
Abstract: Advanced manufacturing products are highly systematic, integrated, and informatization with many technical parameters involved, which needs the specification and guidance of product standards to improve the accuracy, stability and interoperability of advanced manufacturing products and technology. When formulating advanced manufacturing product and technology series association standards, it should be subdivided into three standard documents to write, including “technical requirement”“testing method” and “manufacturing process specification”, and ensure the feasibility, scientificalness, applicability and progressiveness of the standard technical content to improve the standard quality. Finally, taking the association standards for integrally molded micro-motor casing products as an example, the specific practical experience in the aspect of formulation of advanced manufacturing product and technology series association standards is shared.
Keywords: advanced manufacturing industry; product and technology; association standard; formulation and p
参考文献：
[1] 工业和信息化部 . 关于促进制造业有序转移的指导意见[EB/OL].（2021-12-25）[2021-12-31].http://www.gov.cn/zhengce/zhengceku/2022-01/15/content_5668321.htm.
[2] 国务院 . 国务院关于印发计量发展规划（2021—2035 年）的通知 [EB/OL].（2021-12-31）[2021-12-31].http://www.gov.cn/zhengce/content/2022-01/28/content_5670947.htm.
[3] 市场监管总局，科技部，工业和信息化部，等 . 市场监管总局等五部委联合发布《关于加强国家现代先进测量体系建设的指导意见》 [EB/OL].（2022-01-18）[2022-01-18].https://www.samr. gov.cn/jls/gyjl/zxdt/202201/t20220118_339220.html.
[4] 工业和信息化部办公厅 . 工业和信息化部办公厅关于印发制造业质量管理数字化实施指南（试行）的通知 [EB/OL].（2021-12-30）[2021-12-31].http://www.gov.cn/zhengce/zhengceku/2022-01/11/content_5667610.htm.
[5] 广东省测量控制技术与装备应用促进会 . 一体化成型微电机壳体产品技术要求：T/GDCKCJH 038—2021 [S/OL]. 全国团体标准信息平台 .[2021-11-23].http://www.ttbz.org.cn/OrganManage/StandardList/4152?page=2.
[6] 广东省测量控制技术与装备应用促进会 . 一体化成型微电机壳体产品检验方法 [S/OL].T/GDCKCJH 039-2021.[2021-12-20].http://www.ttbz.org.cn/OrganManage/StandardList/4152?page=2.
[7] 广东省测量控制技术与装备应用促进会 . 一体化成型微电机壳体产品制造工艺规范：T/GDCKCJH 040—2021 [S/OL]. 全国团体标准信息平台 .[2021-11-25].http://www.ttbz.org.cn/OrganManage/StandardList/4152?page=2.
作者简介：刘少昱（1984—），女，汉族，广东广州人，工程师，硕士研究生，研究方向：智能传感与测控系统集成技术管理及应用。