当前位置>主页 > 期刊在线 > 信息化应用 >

信息化应用22年16期

汽车操纵稳定性的研究
莫小琴,叶家明
(三亚学院,海南 三亚 572022)

摘  要:采用动态仿真与实验研究相结合的研究方法,深入研究 ADAMS 动态模拟系统,对汽车产品开发项目进行了动态模拟,即汽车动态稳定试验。最终整车仿真模型与实际车辆试验曲线的符合率在 80% 以上,证实了该方法的有效性。整车动力学模型的可靠性和可信性可对未来参数调整提供参考,促进汽车使用体验的改进,并且为现有车辆的标准化指标设定提供理论依据及优化提升方案。


关键词:操控;稳定性;动态仿真



DOI:10.19850/j.cnki.2096-4706.2022.16.040


基金项目:三亚学院校级科研项目(青年项目)(USYQNZX21-53);三亚学院校级教育教学研究项目(青年项目)(SYJJYQ202152)


中图分类号:TP391.9                                  文献标识码:A                                   文章编号:2096-4706(2022)16-0153-05


Research on Vehicle Handling Stability

MO Xiaoqin, YE Jiaming

(University of Sanya, Sanya 572022, China)

Abstract: This paper uses a research method of integrating dynamic simulation with experimental research. It researches deeply the ADAMS dynamic simulation system, conducts dynamic simulation for the vehicle product development project, namely the vehicle dynamic stability test. Finally, the coincidence rate of whole vehicle simulation model and real vehicle test curve is more than 80%, and confirms the effectiveness of this method. The reliability and credibility of the whole vehicle dynamic model could provide a reference for the future parameter adjustment, promote the improvement of vehicle use experience, and provide theoretical basis and optimization scheme for the standardized index setting of existing vehicles.

Keywords: handling; stability; dynamic simulation


参考文献:

[1] 马玉坤,贾策,栾延龙,等 .ADAMS 软件及其在汽车动力学仿真分析中的应用 [J]. 重庆交通学院学报,2004(4):110-113+120.

[2] 徐庆华,吴宪 .ADAMS 软件在复合式后桥动力学模拟中的应用 [J]. 制造业自动化,2004(7):55-56+74.

[3] 凌雯,余卓平,江浩 .ADAMS 在悬架运动学和弹性运动学仿真中的应用 [J]. 上海铁道大学学报,2000(6):80-83.

[4] 任卫群,杨勇,蒋鸣,等 . 采用多体系统动力学的平衡悬架牵引车平顺性研究 [J]. 汽车工程,2004(3):331-335.

[5] 管欣,张威,林柏忠 . 车辆实时动态仿真模型的研究 [J].江苏大学学报(自然科学版),2004(3):203-207.

[6] 秦洪武,刘军 . 多连杆式前悬架的转向定位参数仿真计算研究 [J]. 机械设计与研究,2002(3):19-20+7.

[7] 宋传学,蔡章林 . 基于 ADAMS/Car 的双横臂独立悬架建模与仿真 [J]. 吉林大学学报(工学版),2004(4):554-558.

[8] 孙维汉,顾宏斌.基于ADAMS/CAR汽车动力学仿真 [J].汽车科技,2004(6):19-21+53.

[9] KIM H K,PARK Y S. Dynamic Analysis of a Flexible Vehicle Structure with No liner Force Elements Using Substructure Technique [J]. Mechanics of Structures and Machines,1993,21(3):399-428.

[10] MOUSSEAU C W,SAYERS M W,FAGAN D J. Symbolic Quasi Static and Dynamic Analysis of Complex Automobile Modlels [J]. Vehicle System Dynamics,1992,20(1):446-459.


作者简介:莫小琴(1990—),女,苗族,江西宜春人,讲师,硕士研究生,研究方向:非线性控制。