当前位置>主页 > 期刊在线 > 智能制造 >

智能制造2020年7期

基于频率测控技术的多功能纸张检测系统设计
高天学
(山东华宇工学院,山东 德州 253034)

摘  要:针对文印等行业的纸张计量问题,设计了以单片机及变介质电容式传感系统为控制核心的多功能纸张检测系统并应用于多谐振荡电路,系统首先采用了中值滤波算法对初始频率进行滤波来实现频率的粗定位,然后对中值滤波算法进行了改进,通过对频率的粗定位区间进行二次求中值并进行判断来实现频率的精准定位,同时该系统还配置了蓝牙、语音播报、自校准等功能。实验表明该系统可实时检测纸张数量且工作稳定,为纸张类材料提供了新的计量方法。


关键词:频率测控;多谐振荡;纸张测量;单片机



中图分类号:TM935;TP368         文献标识码:A         文章编号:2096-4706(2020)07-0139-03


Design of Multi-functional Paper Detection System Based on Frequency Measurement and Control Technology

GAO Tianxue

(Shandong Huayu University of Technology,Dezhou 253034,China)

Abstract:In view of the paper measurement problems in the paper printing and other industries,A multi-functional paper detection system based on single chip microcomputer and variable dielectric capacitance sensor system is designed and applied to the multi harmonic oscillation circuit. The system first uses the median filter algorithm to filter the initial frequency to realize the rough positioning of frequency,and then improves the median filter algorithm. It is realized through the secondary median value of the rough positioning interval of frequency and judgment. At the same time,the system is also equipped with Bluetooth,voice broadcast,self calibration and other functions. The experimental results show that the system can detect the number of paper in real time and work stably,which provides a new measurement method for paper materials.

Keywords:frequency measurement and control;multivibrator;paper measurement;microcontrollers


基金项目:山东华宇工学院科技计划项目(2018KJ09);2019 年度德州市市级研发计划项目


参考文献:

[1] 杨振江,蔡德芳. 新型集成电路使用指南与典型应用 [M].西安:西安电子科技大学出版社,1998.

[2] 邱关源,罗先觉. 电路:第5 版 [M]. 北京:高等教育出版社,2006.

[3] 童诗白,华成英. 模拟电子技术基础:第3 版 [M].北京:高等教育出版社,2000.

[4] 张伟,吴红杰,徐海鹰. 电路设计与制板——Protel DXP高级应用 [M]. 北京:人民邮电出版社,2004.

[5] 黄智伟. 全国大学生电子设计竞赛电路设计:第2 版 [M].北京:北京航空航天大学出版社,2010.

[6] 孙同景,陈桂友.Freescale 9S12 十六位单片机原理及嵌入式开发技术 [M]. 北京:机械工业出版社,2008.


作者简介:高天学(1991—),男,汉族,山东济南人,硕士研究生,主要研究方向:射频信号的获取与处理。